top of page
conseyrepuncda

Ispconfig Smtp Ssql



Hi Christoph, I have followed this section and have 2 questions/observations. 1) only one of the certificates for one domain is defined here in smtpd_tls_cert_file and smtpd_tls_cert_key so it will be used for encrypting all the smpt traffic disregarding the domain it will go out from? Would it be possible to have this for each domain separately somehow ?




Ispconfig Smtp Ssql




I have seen taht the email that are sent by the server are not encrypted , so I suggest to add: smtp_tls_security_level = may in the configuration to have the outbound connection encrypted to ( in the config only the inbound connections are encrypted if the inbound server can do it ).


Notice if your clients are using SSL/TLS as protocol and not STARTTLS the option smtpd_tls_wrappermode=yes Is important. I struggled 2-3 hours with Thunderbird. With postfix in double verbose mode I found the reason.


With the relevant text stating: This is a feature that forces every address that can be looked up in $smtpd_sender_login_maps (apparently all of your valid local recipients?) to authenticate in order to be used as a sender. This feature is not usually suitable on a server that handles anything other than initial mail submission.


smtpd_sender_login is pretty restrictive. But most webmail providers I came across seem to enforce that you send only as yourself and not anyone else in the domain. If that causes trouble with virtual_aliases please see the first comment on this page to reflect forwarding and this restriction.


Relevant lines in master.cf: -o smtpd_sender_login_maps=sqlite:/etc/postfix/oli-vmail/virtual_alias_maps.cf,sqlite:/etc/postfix/oli-vmail/email2email.cf -o smtpd_sender_restrictions=reject_sender_login_mismatch


Oct 11 21:00:07 mail.info postfix/submission/smtpd[9107]: E622620231A: client=*.*.*[*.*.*.*], sasl_method=PLAIN, sasl_username=xyz@my.tld Oct 11 21:00:07 mail.info postfix/cleanup[9110]: E622620231A: message-id= Oct 11 21:00:08 mail.info postfix/qmgr[103]: E622620231A: from=, size=3908, nrcpt=1 (queue active)


In the main.cf file we add: smtpd_sender_restrictions = check_sender_access mysql:/etc/postfix/mysql-virtual-block-internal-domains-outside-maps.cf smtpd_restriction_classes = block_internal_domain_outside block_internal_domain_outside = reject


# TLS parameters smtpd_tls_cert_file = /etc/letsencrypt/live/mail.example.com/fullchain.pem smtpd_tls_key_file = /etc/letsencrypt/live/mail.example.com/privkey.pem smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:$data_directory/smtpd_scache smtp_tls_session_cache_database = btree:$data_directory/smtp_scache


smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination myhostname = mail.example.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = $myhostname, mail.example.com, localhost.example.com, , localhost relayhost = #mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 xx.xxx.xx.xx/24


## Make Postfix use rspamd smtpd_milters = inet:127.0.0.1:11332 non_smtpd_milters = inet:127.0.0.1:11332 milter_protocol = 6 milter_mail_macros = i mail_addr client_addr client_name auth_authen


2018-11-08T02:55:22+00:00ERROR 107.208.xxx.xxxmailError in JMail API: Connection: opening to ssl://ecom.example.com:465, timeout=300, options=array ( ) 2018-11-08T02:56:25+00:00ERROR 107.208.xxx.xxxmailError in JMail API: Connection failed. Error #2: stream_socket_client(): unable to connect to ssl://ecom.example.com:465 (Connection timed out) [/var/www/html/example.com/libraries/vendor/phpmailer/phpmailer/class.smtp.php line 294] 2018-11-08T02:56:25+00:00ERROR 107.208.xxx.xxxmailError in JMail API: SMTP ERROR: Failed to connect to server: Connection timed out (110)


Hi. Thanks for the guide. If I want to relay my mail through my isp, what should I include? I am pretty sure I need to fill in relayhost and port (587) and authentication. Should this be done with password authentication or certificates? Can this be done by adding the following? postconf smtp_tls_cert_file=/etc/letsencrypt/live/webmail.example.org/fullchain.pem postconf smtp_tls_key_file=/etc/letsencrypt/live/webmail.example.org/privkey.pem postconf smtp_tls_security_level=may


I added a check so I can send mail with alias emails that are related to my account. You have to use unionmap for postfix or UNION for mysql. smtpd_sender_login_maps=unionmap:mysql:/etc/postfix/mysql-email2email.cf,mysql:/etc/postfix/mysql-virtual-alias-maps.cf smtpd_sender_restrictions = reject_unknown_sender_domain,reject_sender_login_mismatch


Even in 2013, there are still services that continue to offer the deprecated SMTPS interface on port 465 in addition to (or instead of!) the RFC-compliant message submission interface on the port 587 defined by RFC 6409. Service providers that maintain port 465 do so because older Microsoft applications (including Entourage v10.0) do not support STARTTLS, and thus not the smtp-submission standard (ESMTPS on port 587). The only way for service providers to offer those clients an encrypted connection is to maintain port 465.


If you use Amazon SES in an AWS Region other than US West (Oregon), replace email-smtp.us-west-2.amazonaws.com in the preceding command with the SMTP endpoint of the appropriate Region. For more information, see Regions and Amazon SES.


If you use Amazon SES in an AWS Region other than US West (Oregon), replace email-smtp.us-west-2.amazonaws.com in the preceding example with the SMTP endpoint of the appropriate Region. For more information, see Regions and Amazon SES.


If you use vsftpd asFTP server on your system this service will not be run by inetd/xinetdafter the installation of the ISPConfig system but by theispconfig_tcpserver which comes with the ISPConfig system. This happensin order to make sure that vsftpd can handle one Anonymous-FTP accountper IP address. Under inetd/xinetd vsftpd can only handle oneAnonymous-FTP account per server even if the server has multiple IPaddresses. In order to avoid this disadvantage compared to the proftpdserver the ISPConfig system uses the ispconfig_tcpserver.


Hello very good tutorial, but I want to ask why the imap port does not work, the smtp with port 587 works perfect but the imap 143 does not work, RainLoop says MailSo-Net-Exceptions-SocketReadTimeoutException (NetClient.php 514), I appreciate if you have any idea what may be happening and how it can be solved, thanks


Very wonderful tutorial. It is very easy to follow. Please help me, after I completed setting postfix, dovecot configuration failed. Tried to fix. But now I can send or receive any email. The msg smtp connection failed shows up. What did I miss.


Hint: The procedure that is described below is for ISPConfig versions


According to a description in one of my older posts, ispconfig 3.1 + Lets Encrypt + Postfix / Dovecot + PureFTPD in english we can take advantage of the fact, that ISPConfig is just setting symlinks on certificates in the web directory and then just fires up a cron to renew your certificates.


NOTE: if you intend to use numeric addresses, or so-called addressliterals per the SMTP standard, write them in proper SMTP syntax, forinstance --smtpaddress "[192.0.2.6]" or --smtpaddress"[IPv6:2001:DB8::6]".


fetchmail also supports authentication to the ESMTP server on theclient side according to RFC 2554. You can specify a name/password pairto be used with the keywords 'esmtpname' and 'esmtppassword'; the formerdefaults to the username of the calling user.


Final-Recipient: rfc822; [email protected]Original-Recipient: rfc822;[email protected]Action: failedStatus: 5.0.0Remote-MTA: dns; serviciosparatuempresa.comDiagnostic-Code: smtp; 550-Verification failed for 550-No Such User Here 550 Sender verify failedReply InMotionFan says: March 22, 2016 at 12:59 am Hello, 2ff7e9595c


1 view0 comments

Recent Posts

See All

Mm ano x apk

mm year x apk MM Year X APK: um aplicativo de calendário útil e popular em Mianmar Se você é Shwe Myanmar, vai adorar este aplicativo de...

Comments


bottom of page